| All data is for information only------(Home) | |
|---|---|
| PRODUCT DATA of A356.0 |
| Material | A356.0 |
| General Information | A356.0 is heat treatable, has intermediate strengths, and has high resistance to corrosion data of T6 investment casting from mmpds |
| Chemical Composition | Al-7Si-0.35Mg-0.12Ti low impurities |
| EXPERIENCE IN PRACTICE |
|---|
| Development Status | Commercial Product |
| PHYSICAL PROPERTIES |
|---|
| Crystal Structure | Face centered cubic (fcc) |
| Specific Gravity | 2.69 |
| Magnetic Properties | Nonmagnetic |
| ELASTIC PROPERTIES |
|---|
| Tensile Modulus | 71 GPa |
| Shear Modulus | 26.5 GPa |
| Poisson Ratio | 0.33 |
| MECHANICAL PROPERTIES |
|---|
| Ultimate Tensile Strength | 172 MPa(minimum) |
| Proof Stress (0.2%) | 119 MPa(minimum) |
| Elongation | 0.7 %(minimum) |
| THERMAL PROPERTIES |
|---|
| Thermal Conductivity | 147 W/m.K |
| Thermal Expansion Coefficient | 22.3 μstrain/°C |
| Melting Range | 560 to 610 °C |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| Stress Corrosion Status | High Resistance to SCC: Table 1 |