| All data is for information only------(Home) | |
|---|---|
| PRODUCT DATA of AA1060-0 |
| Material | AA1060-0 |
| Chemical Composition | 99.6Al |
| Name of Manufacturer | Corus Postbus 10000, 1970 CA IJmuiden, The Netherlands +31 (0) 251 499111 +31 (0) 251 470000 feedback@ corusgroup.com www.corusgroup.com |
| EXPERIENCE IN PRACTICE |
|---|
| Development Status | Commercial Product |
| Cost Range | Low |
| Lot Reproducibility | Excellent |
| Equivalent Designations | AA 1060 |
| Space Experience | Good |
| PHYSICAL PROPERTIES |
|---|
| Crystal Structure | Face centered cubic (fcc) |
| Specific Gravity | 2.71 @RT |
| Magnetic Properties | Nonmagnetic |
| ELASTIC PROPERTIES |
|---|
| Tensile Modulus | 69 GPa |
| Poisson Ratio | 0.33 |
| MECHANICAL PROPERTIES |
|---|
| Ultimate Tensile Strength | 69 MPa Data Quality: Typical Data |
| Proof Stress (0.2%) | 28 MPa Data Quality: Typical Data |
| Elongation | 43 % Data Quality: Typical Data |
| Fatigue Limit | 21 MPa Data Quality: Typical Data |
| Hardness | 19 HRb Data Quality: Typical Data |
| Shear Strength | 48 MPa Data Quality: Typical Data |
| ELECTRICAL PROPERTIES |
|---|
| Electrical Volume Resistivity | 2.8e-8 ohm.m |
| Electrical Conductivity | 61.3 %IACS |
| THERMAL PROPERTIES |
|---|
| Thermal Conductivity | 234 W/m.K |
| Thermal Expansion Coefficient | 23.6 µstrain/°C |
| Specific Heat | 0.9 J/g.K |
| Melting Range | 646 to 657 °C |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| General Corrosion Status | No specific corrosion protection required |
| Stress Corrosion Status | High Resistance to SCC: Table 1 Data Quality: Design Data |
| EMF vs SCE | -0.76 V Data Quality: Design Data |