| All data is for information only------(Home) | |
|---|---|
| PRODUCT DATA of CDA 102 |
| Material | CDA 102 |
| General Information | Electrical applications demanding highest conductivity. |
| Precautions | Typical data from copper.org All data @ Room Temperature |
| Chemical Composition | 99.95% Cu |
| Name of Manufacturer | Thomas Bolton Copper Products |
| EXPERIENCE IN PRACTICE |
|---|
| Development Status | Commercial Product |
| Cost Range | Very Low |
| Equivalent Designations | C10200; CW005A; 2.0040; CU-C1; CDA102; Cu-FRHC |
| Space Experience | Good |
| PHYSICAL PROPERTIES |
|---|
| Specific Gravity | 8.94 |
| ELASTIC PROPERTIES |
|---|
| Tensile Modulus | 118 GPa |
| Bulk Modulus | 140 GPa (estimate) |
| Poisson Ratio | 0.34 |
| Speed of Sound (longitudinal) | 3570 m/s |
| MECHANICAL PROPERTIES |
|---|
| Ultimate Tensile Strength | 221 to 455 MPa |
| Proof Stress (0.2%) | 68.9 to 365 MPa |
| Elongation | 5 to 50 % |
| Fatigue Limit | 67 MPa |
| Impact strength | 34 to 61 J Remark: Minimum value corresponds to the hardest temper condition, maximum value corresponds to the sofest temper condition |
| Shear Strength | 152 to 200 MPa |
| ELECTRICAL PROPERTIES |
|---|
| Electrical Volume Resistivity | 1.7e-8 ohm.m |
| Electrical Conductivity | 101 %IACS |
| THERMAL PROPERTIES |
|---|
| Thermal Conductivity | 394 W/m.K |
| Thermal Expansion Coefficient | 17.7 μstrain/°C |
| Specific Heat | 0.385 J/g.K |
| Melting Range | 1080 °C |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| Atmospheric Corrosion | Copper corrodes if sulphur is present, forming the familiar green surface patina which inhibits further corrosion |