| All data is for information only------(Home) | |
|---|---|
| PRODUCT DATA of CV-1144-0 |
| Material | CV-1144-0 |
| Safety Datasheet | CV1144-0 |
| Product Datasheet | CV-1144-0P |
| Product Type | Controlled volatility RTV silicone atomic oxygen overcoat |
| Chemical Composition | Dimethyl Diphenyl Silicone Polymer |
| Name of Manufacturer | Nusil Technology
1150 Mark Avenue, Carpinteria, CA 93013, USA +1 805 684 8780 +1 805 566 990 steveb@nusil.com www.nusil.com Polymer Systems Technology Ltd Unit 6, First Floor, Vernon Bldg, Westbourne St, High Wycombe, UK +44 (0)1494 446610 +44 (0)1494 528611 Poly.systechltd@btinternet.com |
| EXPERIENCE IN PRACTICE |
|---|
| Development Status | Special Commercial Product |
| Cost Range | High |
| Lot Reproducibility | Good |
| Space Experience | Good |
| PHYSICAL PROPERTIES |
|---|
| Appearance | Clear, elastomer |
| Viscosity | 265 ± 50 cP Data Quality: Manufacturer's data |
| Shelf Life | 6 month Remark:@ 25°C, Refrigeration may extend shelf life. |
| OPTICAL PROPERTIES |
|---|
| Refractive Index | 1.43 ±0.05 Data Quality: Manufacturer's data |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| Temperature Range(space) | -115°C to +232°C. Data Quality: Manufacturer's dat |
| Outgassing Status | Pass |
| Outgassing(Avg data) | TML = 0.22%, RML =0.21%, CVCM = 0.01% Test:ECSS-Q-70-02 |
| SPECIAL RECOMMENDATIONS |
|---|
| Special Recommendations | CV-1144-0 is normally self bonding. If a primer is required, Nusil SP-120 Silicone primer is recommended. · Cure times at 25°C and 50% RH: - Tack-free time – 1 hour. - Time to handling – 24 hours. |