| All data is for information only------(Home) | |
|---|---|
| PRODUCT DATA of Dunmore DM100 |
| Material | Dunmore DM100 |
| Product Type | Aluminised Kapton HN, acrylic (Y966) pressure-sensitive release liner. |
| Chemical Composition | Polyimide (Kapton HN), Aluminised/Acrylic adhesive. |
| Name of Manufacturer | Dunmore Coorperation
Keystone Industrial Park, 2900 Wharton Rd., Bristol, PA 19007, USA +1 215 781 8895 +1 215 781 9293 www.dunmore.com |
| EXPERIENCE IN PRACTICE |
|---|
| Development Status | Commercial Product |
| Cost Range | Medium |
| Lot Reproducibility | Excellent |
| Space Experience | Good |
| PHYSICAL PROPERTIES |
|---|
| Specific Gravity | 1.42 Data Quality: Manufacturer's data |
| Standard Width | 2.54 mm Data Quality: Manufacturer's data |
| Thickness | 0.025 mm Data Quality: Manufacturer's data |
| Shelf Life | 12 month @ Room Temperature Data Quality: Manufacturer's data |
| ELECTRICAL PROPERTIES |
|---|
| Electrical Volume Resistivity | 1.5e15 ohm.m @ 38% RH Data Quality: Manufacturer's data |
| THERMAL PROPERTIES |
|---|
| Thermal Conductivity | 0.0155 W/m.K @ 23°C Data Quality: Manufacturer's data |
| Thermal Expansion Coefficient | 20 μstrain/°C (-14°C to 38°C) Data Quality: Manufacturer's data |
| Specific Heat | 1.09 J/g.K @ 23°C Data Quality: Manufacturer's data |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| Toxicity/Offgassing | Pass Test: NASA NHB 8060.1A |
| Temperature Range(space) | -40 to +160°C. Data Quality: Manufacturer's data |
| Outgassing(Avg data) | TML = 0.70% CVCM = 0.04% Test: 3M data / NASA 1061 and ASTM E-595 |
| Moisture Absorption | 1.8% @ 50% RH Test: Dupont Data (@ 23°C) |
| Adhesion | 55.8 g.mm width Data Quality: Manufacturer's data/ ASTM D3330 |
| SPECIAL RECOMMENDATIONS |
|---|
| Special Recommendations | All tapes are a standard length of 105 ft ± 5%. (Maximum length available is ca. 160ft.). · All tapes are wound on a 3 ± 0.5 in. diameter core. · Recommended shelf life is a period of one year after date of manufacture, when tape has been stored properly at normal room temperature. · Kapton HN / Y966 acrylic pressure-sensitive tapes can be perforated. · This product is also available with Dunmore's 'corrosion-resistant coating'. · 'Y966' acrylic P/S release liner can also be applied to the metallised surface to provide second-surface mirror capabilities, if desired. · 'Y966' acrylic P/S release liner can also be applied to 51, 76 and 125 micron thick films. · The full Dunmore part number must be designated for precise material description. · 'Y966' high~temperature acrylic tapes are primarily used when high-temperature performance and excellent bond strength are required. · Solar absorptance value is measured on the aluminised side only. |