| Data still to be completed------(Home) | |
|---|---|
| PRODUCT DATA of Makrofol N |
| Material | Makrofol N |
| Product Type | Plastic film. |
| Chemical Composition | Polycarbonate |
| Name of Manufacturer | Bayer AG
Kaiser Wilhelm Allee, D-51373 Leverkusen, Germany www.bayer.de |
| EXPERIENCE IN PRACTICE |
|---|
| Development Status | Commercial Product |
| Cost Range | Low |
| Lot Reproducibility | Fair |
| Space Experience | Good |
| PHYSICAL PROPERTIES |
|---|
| Specific Gravity | 1.2 Data Quality: Manufacturer's data |
| ELECTRICAL PROPERTIES |
|---|
| Electrical Surface Resistivity | 1e13 ohm-sq Remark: 4 days @ 80% RH |
| Dielectric Constant | 3.1 Remark: 50 Hz |
| Dielectric Strength | 170 kV/mm Remark: 4 days @ 80% RH |
| Dissipation Factor | 0.0025 Remark:50 Hz |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| Flammability | Fail (21% O2) Test:NASA NHB 8060-1B |
| Temperature Range(space) | Up to +140°C Data Quality: Manufacturer's data |
| Outgassing(Avg data) | TML = 1.4%, RML = 0.35%, CVCM = 0.01% Test: ECSS-Q-70-02 |
| Ionising Radiation | 10 Mrad Test: Mechanical properties |
| Water Absorption | 0.005 Test: 24 hours immersion |
| SPECIAL RECOMMENDATIONS |
|---|
| Special Recommendations | Post cure 24 hour at 80°C recommended. · Other grades of Makrofol exist, of which the space qualification is incomplete. |