| Data still to be completed------(Home) | |
|---|---|
| PRODUCT DATA of PM 1000 (plate) |
| Material | PM 1000 (plate) |
| Safety Datasheet | SD-PM1-02 |
| General Information | PM 1000 is a cold-workable oxide dispersion strengthened (ODS) Ni based material with a high chromium alloy content |
| Use in Spacecraft | hot metallic structures |
| Product Type | plate |
| Chemical Composition | 20Cr, 3Fe, 0.5Ti, 0.3Al, 0.6 Y2O3, rem Ni |
| Name of Manufacturer | Plansee
A-6600 Reutte /Tirol +43 (5672) 600-0 +43 (5672) 600-500 info@plansee.com www.plansee.com |
| EXPERIENCE IN PRACTICE |
|---|
| Development Status | Special Commercial Product |
| Cost Range | High |
| Space Experience | Poor |
| PHYSICAL PROPERTIES |
|---|
| Specific Gravity | 8.24 |
| ELASTIC PROPERTIES |
|---|
| Tensile Modulus | 150 to 210 GPa Remark: Depends on lattice direction [100] textured:150 GPa, while [110] textured 210 GPa |
| ELECTRICAL PROPERTIES |
|---|
| Electrical Volume Resistivity | 0.000001 ohm.m |
| THERMAL PROPERTIES |
|---|
| Temperature Range | 1200 °C(minimum) |
| Thermal Conductivity | 12 W/m.K |
| Thermal Expansion Coefficient | 12 to 12.9 μstrain/°C |
| Specific Heat | 0.44 J/g.K |
| Melting Range | 1410 °C |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| Stress Corrosion Status | Unknown Remark: Material tested only once. Graded as Class 1 showing a high resistance to SCC Test: ECSS-Q-70-37A |