| All data is for information only------(Home) | |
|---|---|
| PRODUCT DATA of PSG 120 FD |
| Material | PSG 120 FD |
| Product Type | Matt-white Paint, 2-part. |
| Chemical Composition | Silicone / Zinc Oxide |
| Name of Manufacturer | Akzo Nobel Aerospace Coatings
Rijksstraatweg 31, NL-2171 AJ Sassenheim, Postbus 3, NL-2170 BA Sassenheim, The Netherlands +31 71 308 2905 / 3311 +31 71 308 2056 www.akzonobel.com |
| EXPERIENCE IN PRACTICE |
|---|
| Development Status | Special Commercial Product |
| Cost Range | High |
| Lot Reproducibility | High |
| Space Experience | Fair |
| PHYSICAL PROPERTIES |
|---|
| Solid Content | 38% Data Quality: Manufacturer's data |
| Shelf Life | 6 month @20°C |
| OPTICAL PROPERTIES |
|---|
| Hemispherical Emittance | 0.88 Remark:ECSS-Q-70-09 |
| Solar Absorbtance | 0.19 Remark: ECSS-Q-70-09 |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| UV Particle Effects | Δαs = 0.2 (value for PSG 120) Test:3 years/OTS spec. |
| Flammability | Pass (21% O2) Test:NASA NHB 8060-1B |
| Thermal Cycling | Pass Test:ECSS-Q-70-04 |
| Outgassing(Avg data) | TML = 0.59%, RML = 0.56%, CVCM = 0.04% Test:ECSS-Q-70-02 |
| SPECIAL RECOMMENDATIONS |
|---|
| Special Recommendations | This paint is a low-outgassing version of PSG 120 from the same manufacturer, which was used on several space projects. · Whereas the PSG120 version requires a high-temperature cure, PSG120FD can be cured at room temperature. · On high-absorbtance substrates the paint layer must be at least 200mm thick if low final absorbtance is required. · Must be used with primer P128 from Astral. · See ECSS-Q-70-33 for application process. · Equivalent MAP product: SG120FD. |