| All data is for information only------(Home) | |
|---|---|
| PRODUCT DATA of Scotch Tape Y 966 |
| Material | Scotch Tape Y 966 |
| Product Datasheet | Y966 |
| Product Type | Adhesive transfer tape. |
| Chemical Composition | Acrylic |
| Name of Manufacturer | 3M Belgium
Hermes Laan, 7, B-1831 Diegem, Belgium +32 (0)2 722 51 11 +32 (0)2 720 02 25 www.3m.com |
| EXPERIENCE IN PRACTICE |
|---|
| Development Status | Commercial Product |
| Cost Range | Low |
| Lot Reproducibility | Fair |
| Space Experience | Fair |
| PHYSICAL PROPERTIES |
|---|
| Thickness | 0.05 mm |
| MECHANICAL PROPERTIES |
|---|
| Ultimate Tensile Strength | 0.003 MPa Remark:@ 160°C; Test piece: 1.27 x 7.65 cm) Data Quality: Manufacturer's data |
| Tensile Peel Strength | 0.18 N/mm Remark: 90° peel Data Quality: Manufacturer's data |
| Tensile Strength | 0.003 N/mm Data Quality: Manufacturer's data |
| THERMAL PROPERTIES |
|---|
| Temperature Range | -40 to 150°C Data Quality: Manufacturer's data Long term |
| RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY |
|---|
| Thermal Cycling | Pass Test:ECSS-Q-70-04 |
| Temperature Range(space) | -40°C to +150°C. Test:Manufacturer’s Data, Long Term |
| Outgassing(Avg data) | TML = 0.425%, RML =0.295%, CVCM = 0% Test:ECSS-Q-70-02 |
| SPECIAL RECOMMENDATIONS |
|---|
| Special Recommendations | Recommended as a replacement for Scotch Tape 467 (same basic properties, but better temperature and solvent resistance). · When used to bond fragile materials such as Second Surface Mirrors (SSM), the tape must be applied first on the structure side. The liner is then removed and a suitable shape SSM bonded. If tape is already applied to the back of the SSM (as in some Sheldahl products), the liner must be removed with the utmost care so as to avoid stresses on the SSM · Availability in Europe is limited when purchased quantity is very small. Maximum width is 122 cm. · Not to be used when peel forces are applied. |